Short Course on Atomization & Sprays 2017

February 20-23, 2017 Darmstadt, Germany

Please see the upcoming 2019 edition of this course!

We present the current understanding and state-of-the-art of atomization fundamentals, their realization in atomizer systems and their application in a wide variety of engineering branches, including spray drying, spray coating, spray cooling, fuel injection, etc. The course is offered by the profile area Thermo-Fluids & Interfaces in cooperation with DFG SFB/TRR 75.

Please find a detailed description and program in the course flyer here

From theory to practice
These aspects are first addressed theoretically in terms of hydrodynamic instabilities of liquid jets and sheets – primary atomization. This is followed by considerations about the break-up of single droplets – secondary atomization. Engineering solutions for realizing the different atomization mechanisms are then presented.

Experimental aspects
The second day is devoted to experimental descriptors and diagnostics of sprays and droplets. Both non-optical and optical techniques are addressed. Focus is placed on drop size and velocity determination, but an overview is also given about more advanced techniques, allowing temperature and composition to be determined.

Modeling and Simulation
The third day presents possibilities for simulating atomization and spray processes. Modelling of primary atomization is discussed, as well as transport processes within sprays and spray/wall interactions.

Applications
The final day of the course covers a wide variety of applications and how spray systems have been developed and customized to meet specific requirements and constraints.

Discuss with renowned expert and get in touch with people from the industry
The program foresees intensive discussions between the participants and the lecturers and also among the participants. The aim is to address on-going development and application problems suggested by the participants. Industrial exhibitors of spray diagnostics will be available on the second day for demonstrations and discussions.

The course language is English.

Monday, February 20: Fundamentals
8:30 Registration, Distribution of Lecture Notes
9:00 Welcome, Introductions, Overview of the Course (Tropea)
9:30 Techniques of Atomization: Overview of Atomizers and Their Applications (Tropea)
10:30 Coffee
11:00 Fluid Mechanic Fundamentals (Brenn)
12:00 Lunch
13:00 Design of Spraying Devices I (Walzel)
13:45 Fundamentals of Atomization (Roisman)
14:30 Coffee
15:00 Heat and Mass Transfer from Drops: Fundamentals (Brenn)
15:45 Secondary Atomization (Roisman)
16:30 Drop-Drop Interactions (Brenn)
17:15 Close of First Day with Beer and Pretzels

Tuesday, February 21: Characterisation and Diagnostics
9:00 Spray Characterisation – Quantifiers and Standards (Tropea)
9:45 Imaging Techniques (Leick)
10:30 Coffee
11:00 Phase Doppler Techniques (Tropea)
12:00 Lunch
13:00 Other Optical Techniques (Tropea)
13:45 Measurement of Drop Temperature and Composition (Lemoine)
14:45 Coffee
15:15 Atomization of Complex Fluids (Brenn)
16:00 Flash Boiling Atomization (Sher)
17:00 Design of Spraying Devices II (Walzel)
17:45 Close of Second Day

Wednesday, February 22: Modeling and Simulation
9:00 Fundamentals of Modelling I (Yarin)
9:45 Fundamentals of Modelling II (Yarin)
10:30 Coffee
11:00 A Survey on Numerical Simulation Methods for Multiphase Flows (Bothe)
11:45 Direct Numerical Simulation of Primary Jet Breakup (Weigand)
12:45 Lunch
13:45 Volume-of-Fluid Method for Drop Collision (Bothe)
14:30 Characterisation of Drop Evaporation and Drying (Yarin)
15:15 Coffee
15:45 Powder Production in Spray Processes (Fritsching)
16:45 Close of Third Day

Thursday, February 23: Applications & Advanced Topics
9:00 Drop/Wall Interaction (Roisman)
9:45 Spray Painting (Chandra)
10:30 Coffee
11:00 Atomizers for Fuel Injection (Leick)
12:00 Droplet Impingement Cooling with Evaporation (Stephan)
12:45 Lunch
13:45 Spray Coating (Chandra)
14.30 Spray/Wall Impact (Tropea)
15:15 Close of Short Course

  • Prof. Dr. Dieter Bothe
    heads the Institute of Mathematical Modeling and Analysis at TU Darmstadt
  • Prof. Dr.-Ing. Günter Brenn
    heads the Institute of Fluid Mechanics and Heat Transfer at the TU Graz
  • Prof. Dr. Sanjeev Chandra
    Department of Mechanical and Industrial Engineering, University of Toronto
  • Prof. Dr.-Ing. Udo Fritsching
    heads the group Multiphase Flow, Heat- and Mass Transfer at the IWT, University of Bremen
  • Dr.-Ing. Philippe Leick
    Investigates the fundamentals of fuel injection processes at the Bosch central research laboratories in Renningen
  • Prof. Fabrice Lemoine
    heads the Laboratoire d’Energétique et de Mécanique Théorique et Appliquée at the Université de Lorraine, Nancy
  • Priv.-Doz. Dr. Ilia V Roisman
    is a senior researcher at the Institute of Fluid Mechanics and Aerodynamics at the TU Darmstadt
  • Prof. Eran Sher
    Faculty of Aerospace Engineering, Technion – Israel Institute of Technology
  • Prof. Dr.-Ing. Peter Stephan
    heads the Institute of Technical Thermodynamics at the TU Darmstadt
  • Prof. Dr.-Ing. Cameron Tropea
    heads the institute of Fluid Mechanics and Aerodynamics at the TU Darmstadt
  • Prof. Dr. techn. Peter Walzel
    heads the Institute of Mechanical Process Engineering at the TU Dortmund
  • Prof. Dr.-Ing. Bernhard Weigand
    heads the Institute of Aerospace Thermodynamics at the University of Stuttgart
  • Prof. Dr. Alexander L. Yarin
    Department of Mechanical and Industrial Engineering, University of Illinois at Chicago